Laboratory and Process Analyzers
Additional Instruments • Aniline • Bitumen • Blends • Calorimetry • Centrifuge • Cold Behaviours • Colourimetry • Corrosion • Demulsibility and Foaming • Densimetry • Distillation • Flash Point • Gum - Rubber • Hydrometers • LPG • Lubricating Greases and Oils • Oxidation • Penetration • Residues • Rust • Sediments • Sulfur • Thermometers • Vapour Pressure • Viscosimetry • Water • Wax
Penetration of Bituminous Material, Grease, Petrolatum, Waxes, Gel
ASTM D5 - D217 - D937 - D1321 - D1403 - D1831 - D2884
DIN 51579 - DIN 51580 - DIN 51804 - DIN 52010
IP 49 - IP 50 - IP 179 - IP 310 - IP 376
ISO 2137
NF T60-119 - NF T60-132 - NF T60-140
ASTM D5, IP 49, DIN 52010 - Penetration of bituminous material
For determination of the penetration of semi-solid and solid bituminous materials.
ASTM D217, ASTM D1403, IP 50, IP 310, DIN 51804, ISO 2137, NF T60-132, NF T60-140 - Cone penetration of lubricating grease
Cover four procedures for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass and finish.
ASTM D937, IP 179, DIN 51580, ISO 2137, NF T60-119 - Cone penetration of petrolatum
Covers measuring with a penetrometer the penetration of petrolatum as an empirical measure of consistency.
ASTM D1321, IP 376, DIN 51579 - Needle penetration of petroleum waxes
Covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250.
ASTM D1831 - Roll stability of lubricating grease
Covers determination of the changes in the consistency, as measurably cone penetration, of lubricating greases when worked in the roll stability test apparatus.
ASTM D2884 - Yield stress of heterogeneous propellants by cone penetration method
Covers determination of the yield stress of heterogeneous propellants, both of the gel and emulsion types, containing from 0 to 70% solid additives.
LT/P-65000/M
Precision penetrometer - ASTM D5, D217, D937, D1321, D1403, D1831, D2884
- Metallic base with inset spirit level and adjustable feet
- Stainless steel column supporting a calibrated dial with 360 divisions corresponding to 1/10 of mm and release button with manual halting function
- Micrometric regulation
- 47.5 gr plunger in stainless steel
- Check light
LT/P-66000/M
Semiautomatic penetrometer - ASTM D5, D217, D937, D1321, D1403, D1831, D2884
- Metallic base with inset spirit level and adjustable feet
- Plate painted with epoxy products that works as a control box with precision digital timer
- Stainless steel column supporting a calibrated dial with 360 divisions corresponding to 1/10 of mm and release button controlled by a low voltage solenoid, controlled on its turn by a timer
- 47.5 gr plunger in stainless steel
- Micrometric regulation of movements with a check light
Accessories
- LAB-100-661/50: plunger weight 50 g
- LAB-100-661/100: plunger weight 100 g
Spare Parts
- LAB-100-661/47: plunger weight 47.5 gr
- LAB-150-038: low voltage solenoid
- LAB-150-037: push button
- LAB-150-080: digital timer
Optional Accessories
- T-AS17C: thermometer ASTM 17C
- T-AS17C/C: thermometer ASTM 17C with calibration certificate DKD
- T-AS63C: thermometer ASTM 63C
- T-AS63C/C: thermometer ASTM 63C with calibration certificate DKD
- T-AS64C: thermometer ASTM 64C
- T-AS64C/C: thermometer ASTM 64C with calibration certificate DKD
Accessories for ASTM D5 , IP 49, EN 1426
- LAB-100-662: penetration needle ASTM D5, IP 49, 2.5 g, pack of 5
- LAB-100-1426/20: reduction ring for reduce sample volume, 53 mm external diameter, 36 mm internal diameter, 20 mm height, for EN 1426
- LAB-100-1426/30: reduction ring for reduce sample volume, 53 mm external diameter, 36 mm internal diameter, 30 mm height, for EN 1426
- LAB-100-666/B: sample container 55 × 35 mm, made in brass, pack of 5 pcs.
- LAB-100-666/C: sample container 55 × 45 mm, made in brass, pack of 5 pcs.
- LAB-100-666/E: sample container 70 × 45 mm, for bitumen, penetrations between 200 and 350, made in brass, pack of 5 pcs.
- LAB-100-666/G: sample container 70 × 60 mm, for bitumen, penetrations between 350 and 500, made in brass, pack of 5 pcs.
Accessories ASTM D217
- LAB-100-664: optional penetration cone ASTM D217, 65 mm diameter, body of brass, stainless steel tip
- LAB-100-664/SS: optional penetration cone ASTM D217, 65 mm diameter, body and tip of stainless steel, for European Pharmacopoeia
- LAB-100-665: optional penetration cone ASTM D217, 69 mm diameter, body and tip of stainless steel
- LAB-100-666/I: sample container 76.5 × 63.5 mm, made in brass, pack of 3 pcs.
- LAB-100-666/I-ring: external ring for grease restraint/recovery, 203 mm diameter
Accessories for ASTM D937
- LAB-100-664: optional penetration cone ASTM D217, 65 mm diameter, body of brass, stainless steel tip
- LAB-100-666/H: sample container 100 × 65 mm, made in steel with cover, pack of 3 pcs.
Accessories for ASTM D1321
- LAB-100-663: needle ASTM D1321, 2.5 g, stainless steel
- LAB-100-666/F: sample container wax test cylinder 25 × 32 mm, pack of 2 pcs.
- LAB-100-666/BC: base plate in brass 63.5 × 38 mm, pack of 2 pcs.
LAB-100-714
LAB-100-718
Accessories for ASTM D1403 – D1831
- LAB-100-711: penetration cone ½ ASTM D1403 IP 310 22.5g,
body and tip in stainless steel
- LAB-100-712: slider ½ - 15g
- LAB-100-713: sample container ½ 38 × 32 mm pack of 3 pcs.
- LAB-100-714: half-scale grease worker ASTM D1403, brass, with 8 holes 6.35 mm diameter
- LAB-100-715: penetration cone ¼ ASTM D1403, IP 310, 1.20 gr, body Plexiglas®, stainless steel tip
- LAB-100-716: Plexiglas® slider ¼ 8.18 gr
- LAB-100-717: sample container ¼ 19 × 11.5 mm, pack of 3 pcs.
- LAB-100-718: quarter-scale grease worker ASTM D1403, brass, with 8 holes 3.17 mm diameter
Accessories for ASTM D2884
- LAB-100-719: propellant cone 15 gr, ∅ 65 mm, body in magnesium, stainless steel tip
- LAB-100-661/47: plunger 47.5 gr
- LAB-100-666/I: sample container 76.5 × 63.5 mm, made in brass, pack of 3 pcs.
Optional Accessories
- LT/CB-40800/M-10: cryostatic bath (8 litres) for temperatures up to -10°C
- professional cryostatic baths ideal for all thermostatic application
- outer body in steel coated in epoxy anti-acid paint
- double wall heat insulation
- internal chamber in seamless stainless steel with rounded corners for efficient circulation and cleaning
- digital display P.I.D. thermostat
- temperature range from -10°C to +99,9°C accuracy to ±0,5°C to +37°C (BC)
- display precision ±0,1°C
- exit RS 485
- safety thermostat
- circulating pump: 1mt prevalence
- power supply 230 V - 50 Hz
- built according to C.E.I. normatives (66-5)
- 2 class, DIN 12880
- capacity: 8 litres
- LAB-100-660/A: transfer dish
- LAB-100-332: digital stopwatch
Linetronic Technologies SA
Via Onorio Longhi 2 • 6864 Arzo • Mendrisio • Switzerland
tel. +41 91 630 07 03 • fax +41 91 630 07 19
email: info@lin-tech.ch